Technical Program

Please note that this is a work in progress. Sessions may be subjected to last minute changes until the congress starts.

Monday, 14-06-2021

    • 1251 - The thick strip method for slender body fluid structure interaction
      L. CAI*, M. Jebahi, F. Abed-Meraim
    • 1252 - Microstructured porous material models for damage induced by fluids in compressed rocks
      A. Pandolfi*
      • 640 - Topology optimization of lattice materials with geometric defects induced by power bed fusion
        D. Pasini*
      • 720 - A Computational Framework for the Development of Programmable Materials based on Unit Cells and Multiscale Optimization
        A. Leichner*, T. Lichti, H. Andrä, F. Wenz, C. Eberl, A. Schwarz, C. Hübner
      • 741 - Electro-thermo-mechanical analysis of actuator structure made of functionally graded material. (Online)
        J. Paulech*, V. Kutiš, J. Murín, G. Gálik, V. Goga
      • 961 - Adaptive topology optimization of cellular materials for elastic and thermal applications
        M. Gavazzoni*, . Ferro, S. Foletti, S. Perotto
      • 710 - Topology Optimization for Thermoelastic Metamaterials
        M. van den Ouden*, S. Koppen, M. Langelaar
      • 764 - Periodic Open Cellular Structures for intensification of catalytic reactors
        C. Ferroni*, M. Bracconi, M. Ambrosetti, M. Maestri, G. Groppi, E. Tronconi
      • 798 - KEYNOTE - Modeling cascading gravitational mass movements with the Material Point Method
        J. Gaume*, A. Cicoira, X. Li, L. Blatny, C. Jiang, B. Sovilla
      • 107 - Overview of MPM formulations for unsaturated soils
        F. Ceccato, A. Yerro, V. Girardi*
      • 750 - A Staggered Coupling Scheme of the Material Point Method and the Finite Element Method using Gauss Seidel Communication Pattern (Online)
        V. Singer*, B. Chandra, R. Wüchner, A. Larese
      • 420 - MPM modelling of earthquake-induced rapid landslide using by thermo-hydro-mechanical coupled formulation
        L. Lemus*, N. Pinyol, E. Alonso
      • 943 - Multi-scale Investigation of Magneto-Hydrodynamic Assist Device for Actively Powered Fontan Circulation
        A. Das*, R. Prather, E. Divo, A. Kassab, A. Nunez, W. DeCampli
      • 953 - Tailoring Left Ventricular Assist Device Cannula Implantation Using Coupled Multi-Scale Multi-Objective Patient-Specific Optimization
        A. Dankano*, R. Prather, B. Lozinski, E. Divo, W. DeCampli, A. Kassab
      • 339 - An Isogeometric method for modeling the excitation-contraction of a thin cardiac tissue
        A. Nitti*, M. de Tullio, J. Kiendl, A. Gizzi
      • 966 - In-silico analysis of materials for aortic valve replacements
        D. Oks*, C. Samaniego, M. Vázquez, G. Houzeaux, C. Butakoff
      • 686 - A coupled ODE-PDE model for chemotaxis on microfluidic chips
        G. Bretti*, R. Natalini, N. Roselli
      • 1213 - Deep learning the solution operator of parametric partial differential equations
        S. Wang*, H. Wang, P. Perdikaris
      • 1261 - Self-supervised Learning for Astronomical Sky Surveys
        P. Harrington*, M. Hayat, G. Stein, Z. Lukic, M. Mustafa
      • 366 - Deep learning-based reduced order models for real-time approximation of parametrized coupled PDE problems
        S. Fresca*, A. Manzoni
      • 942 - Artificial neural network for bifurcating phenomena modelled by nonlinear parametrized PDEs
        F. Pichi*, F. Ballarin, G. Rozza, J. Hesthaven
      • 1191 - Reduced models for chemical kinetics using autoencoder neural networks
        P. Zhang*, R. Sankaran
      • 396 - KEYNOTE - Learning digital twins for dynamical systems
        P. Berri*, L. Mainini
      • 899 - Discovering the physical structure of dynamical systems with deep learning
        Q. Hernández*, A. Badías, D. González, F. Chinesta, E. Cueto
      • 765 - Physically sound deep learning development of digital twins from partial measurements of real world data
        B. Moya*, A. Badías, D. González, F. Chinesta, E. Cueto
      • 433 - On the development of digital twins that learn and correct themselves
        B. Moya, A. Badías, I. Alfaro, F. Chinesta, E. Cueto*
      • 346 - Fast Computation in Electric Motors for Design, Optimization and Prediction of Noise, Vibration and Harshness
        A. Sancarlos*, K. Bouayed, N. Zerbib, E. Cueto, F. Chinesta, J. Duval
      • 1011 - Multiscale coupling of one-dimensional vascular models and elastic tissues
        L. Heltai*, A. Caiazzo, L. Müller
      • 348 - A mixed framework for topological model reduction of coupled PDEs
        I. Gjerde*, M. Rognes
      • 81 - 1D-3D methods for tubular network systems embedded in porous media beyond isotropic linear diffusion
        T. Koch*, H. Wu, R. Helmig, M. Schneider
      • 301 - Modeling and simulation of vascular tumors embedded in evolving capillary networks
        T. Köppl*, P. Jha, M. Fritz, T. Oden, W. Andreas, B. Wohlmuth
      • 94 - Finite Element Methods for the simulation of thixotropic flow problems
        N. Begum*, A. Ouazzi, S. Turek
      • 965 - Reduced Order Methods for Uncertainty Quantification Problems applied to Optimal Control in Environmental Sciences
        M. Strazzullo*, G. Carere, F. Ballarin, G. Rozza, R. Stevenson
      • 969 - Feedback control for coupled systems by kernel surrogates.
        T. Ehring*, . Haasdonk
        M. SHARIFI*, A. Vincenti, J. Chassaing
      • 669 - Projection-based reduced order model for prestressed hydroelastic vibrations
        C. HOAREAU*, J. DEÜ, R. OHAYON
      • 978 - Biomechanical tongue model prediction of fossil hominins: evaluation and uncertainties propagation
        M. EL MOUSS*, A. Belme, Y. Payan, P. Perrier, A. VIALET
        • 1253 - Multiscale multiphysiology predictive models of brain
          D. Calvetti*
        • 683 - Topology optimization for additive manufacturing: numerical strategies for the overhang problem
          F. Mezzadri*
        • 608 - Parametric Shape Optimization for combined Additive–Subtractive manufacturing
          L. Tamellini*, M. Chiumenti, C. Altenhofen, M. Attene, O. Barrowclough, M. Livesu, F. Marini, M. Martinelli, V. Skytt
        • 398 - Modeling, Topology Optimization and Experimental Validation of Glass-Transition-based 4D-printed Polymeric Structures (Online)
          S. Pakvis*, G. Scalet, S. Marconi, F. Auricchio, M. Langelaar
        • 660 - Automate shape optimization with Fireshape
          A. Paganini*, F. Wechsung
        • 1170 - Modelling and Control of Complex Shapes via Functional Data Analysis
          R. Scimone*, T. Taormina, B. Colosimo, M. Grasso, A. Menafoglio, P. Secchi
        • 809 - A deterministic approach for shape and topology optimisation under material uncertainty in additive manufacturing
          C. Mang*, L. Zoghaib, J. Cortial, C. Nardoni, D. Danan, F. Bordeu
        • 946 - Preliminary Investigation of an Injection-Jet Self-Powered Fontan Circulation
          R. Prather*, A. Das, M. Farias, E. Divo, A. Kassab, W. Decampli
        • 981 - Multiscale Investigations of Hybrid Comprehensive Stage II Procedure for Treatment of Congenital Heart Disease
          A. Das, R. Prather, M. Hameed, M. Farias, E. Divo*, A. Kassab, W. Decampli
        • 758 - Nonlocal Multiscale Interactions in Brain Neurodegenerative Protein Dynamics and Coupled Proteopathic Processes (Online)
          S. Pal, R. Melnik*
        • 991 - Joint Contact Pressure on Healthy and Dysplastic Infant Hips during the Barlow Maneuver
          C. Zlock, L. Donohue, A. Fleming, V. Huayamave*
        • 954 - Data-driven reduced order modeling of environmental hydrodynamics using deep autoencoders and neural ODEs
          S. Dutta*, P. Rivera-Casillas, O. Cecil, M. Farthing, E. Perracchione, M. Putti
        • 1190 - Machine Learning Assisted Simulations of Materials Properties
          Y. Li*, M. Lupo Pasini, M. Lupo Pasini, M. Eisenbach
        • 815 - Studies of Shape Memory Graphene Nanostructures via Integration of Physics-based Modelling and Machine Learning
          C. Leon*, R. Melnik
        • 410 - Finite element model and machine learning for the structural health monitoring of continuous welded rails
          A. Enshaeian, M. Belding, P. Rizzo*
        • 1260 - Designing molecular models by machine learning and experimental data
          C. Clementi*
        • 708 - A Deep Learning Approach for Curvature Prediction in Algebraic Volume of Fluid Methods
          Z. Kraus, J. Friedrich, F. Köhler*, M. Schäfer
        • 402 - Robust Preconditioners for Mixed-dimemsional Models of Flow in Fractured Porous Media
          A. Budisa, W. Boon, X. Hu*
        • 394 - Interface Preconditioners for Multiphysics Problems
          A. Budisa*, X. Hu, M. Kuchta, K. Mardal, L. Zikatanov
        • 702 - 3D-1D coupling on non conforming meshes via a three-field optimization based domain decomposition
          S. Berrone*, D. Grappeine, S. Scialò
        • 294 - A Mortar-type Finite Element Approach for Beam-like Structures Submerged in Incompressible Fluid Flow
          N. Hagmeyer*, M. Mayr, A. Popp
        • 380 - A mortar-type finite element approach for full coupling of 1D Cosserat structures embedded inside 3D volumes
          I. Steinbrechere*, A. Popp, C. Meier
        • 937 - Numerical simulation of water waves generated by landslides impact. Application to Vajont disaster
          M. Cremonesi*, A. Franci, U. Perego, G. Crosta, E. Oñate
        • 589 - Two-Fluid solution of hydraulic flows in realistic mountain scenarios
          R. Rossi*, U. Chasco, R. Zorrilla
        • 101 - Coupling the Discrete Element Method with the Finite Element Method to Simulate Rockfall Impact Experiments (Online)
          K. Sautter*, H. Hofmann, C. Wendeler, M. Celigueta, P. Bucher, K. Bletzinger, R. Wüchner
        • 343 - Particle Finite Element simulation of cutting tool-soil interaction in partially saturated soft soils
          A. Leon Bal*, G. Meschke
        • 853 - A coupled two-phase model for numerical simulation of a real debris avalanche
          S. Moussavi Tayyebi*, M. Pastor, M. Martin Stickle, A. Yague, D. Manzanal, M. Molinos, P. Navas
        • 1239 - Numerical Simulations of Radiative Transfer equations for Greenhouse Gas Effects
          O. Pironneau*
        • 1249 - Models for the Geographic Spread of Infectious Disease Among Humans
          W. Fitzgibbon*, J. Morgan
        • 1248 - Unsteady Interaction of Aerodynamics with Wing Structure in Gust Load Control
          N. Quin*
        • 1247 - Multi-objective Natural Laminar Flow Optimization using Variable Fidelity and Evolutionary Algorithms for Drag reduction. Applications to Aircraft Wing Shape Design. (Online)
          J. Periaux*, C. Yongbin, T. Zhili
        • 375 - KEYNOTE -A computational study of two-phase flows on surfaces
          M. Olshanskii, Y. Palzhanov, A. Quaini*, A. Zhiliakov
        • 345 - Linearized Boundary Element Method with Arbitrary Lagrangian Eulerian formulation for deformable structures coupled with potential flows
          R. Le Mestre*, J. Schotté, O. Doaré
        • 808 - Interface conditions for arbitrary flows to the fluid-porous interface in Stokes-Darcy systems
          E. Eggenweiler*, I. Rybak, M. Discacciati
        • 364 - Regularization-robust preconditioners for optimal control problems under uncertainty
          F. Nobile, T. Vanzan*
        • 164 - Driving bifurcating parametrized nonlinear PDEs by optimal control strategies: application to Navier-Stokes equations
          F. Pichi, M. Strazullo, F. Ballarin*, G. Rozza

        Tuesday, 15-06-2021

        • 723 - Topological derivative-based topology optimization of incompressible structures using mixed formulations
          I. Castañar*, J. Baiges, R. Codina
        • 687 - Stiffness and strength-based lightweight design of structures and materials using topology optimization
          C. Almeida*, F. Conde, P. Coelho
        • 365 - Multiscale modelling of flow due to the peristaltic wave in deforming poro-piezoelectric medium
          E. Rohan*, V. Lukeš, J. Camprová-Turjanicová
        • 1007 - Morphological Instability of a Nanovoid in a Solid during Surface Diffusion
          A. Vakaeva, G. Shuvalov*, S. Kostyrko
        • 328 - Energy-momentum time integration of gradient-based models for fiber-bending stiffness in anisotropic thermo-mechanical continua
          J. Dietzsch*, M. Groß, I. Kalaimani
        • 323 - Variational computational modelling of dynamical behaviour of fiber roving composites with inelastic anisotropic continua and thermomechanical coupling
        • 755 - A coupled seepage-deformation SPH framework for unsaturated porous medium
          Y. Lian*, H. Bui, G. Nguyen, A. Haque
        • 756 - Simulation of Breakwater Failure induced by Tsunami Using an ISPH-DEM Coupled Method
          K. Tsuji*, M. Asai, K. Kasama
        • 759 - Smoothed particle hydrodynamics method for landslide problems based on Biot’s formulation and elastoplastic constitutive models
          D. Morikawa*, M. Asai
        • 836 - Modelling concrete flow with a resolved SPH-DEM coupled method
          C. Peng*, L. Zhan, W. Wu
        • 290 - Discrete numerical modelling of single-particle crushing and oedometric tests, for different values of suction
          J. Manso*, J. Marcelino, L. Caldeira
        • 533 - Embedded Mesh Methods for CFD and FSI problems. Application to exact representation of thin-walled bodies. (Online)
          R. Zorrilla*, R. Rossi
        • 719 - High-order unfitted finite elements with aggregation by interpolation
          E. Neiva*, S. Badia, F. Verdugo
        • 724 - From STLs to embedded integration meshes via robust polyhedra clipping (Online)
          P. Martorell*, S. Badia, F. Verdugo
        • 129 - Elastoplastic indentation of unsaturated soils using a rigid cylinder
          J. Ghorbani*, J. Kodikara
        • 278 - Evaluation of the performance of u–p formulation-based analysis by the u–w–p formulation-based analysis in oscillation problem
          T. Toyoda*, T. Noda
        • 408 - Effect of relative acceleration of pore fluid on seismic behaviour of unsaturated embankment
          R. Uzuoka*, M. Yaku, K. Ueda
        • 387 - Clarification of water absorption failure mechanisms of unsaturated silt triaxial specimen through three-phase elastoplastic finite deformation analysis considering inertia force
          T. YOSHIKAWA*, T. NODA
        • 752 - A Fully Coupled Theoretical and Computational Model for Unsaturated Soils: Numerical Formulation and Experimental Verification
          M. Eyupgiller, M. Ulker*
        • 338 - Handling heterogeneous structures and materials using blending schemes in heterogeneous V-reps and trivariate fillets
          E. Cirillo*, R. Massalha, G. Elber
        • 169 - Immersed thermo-mechanical analysis of selective laser melting processes
          M. Carraturo*, J. Jomo, S. Kollmannsberger, E. Rank, A. Reali, F. Auricchio
        • 968 - A multiscale topology optimization method for customized orthopedic insoles
          N. Ferro*, S. Perotto, D. Bianchi, R. Ferrante, M. Mannisi
        • 327 - A numerical framework for the electro-mechanical analysis of conductive tracks in Lightweight Embedded Electronics.
          B. Cordewener*, J. Knippenberg, M. Geers, J. Remmers
        • 347 - Optimization of additively manufactured scaffolds for bone tissue engineering
          P. Dondl*, P. Poh, M. Zeinhofer
        • 295 - An elasto-plastic constitutive model for the chemo-mechanical behaviour of non-active clays
          G. Della Vecchia*
        • 813 - A coupled hydro-chemo-mechanical model for rock expansions induced by crystal growth
          A. Ramon*, E. Alonso
        • 776 - Numerical simulation of a multiphase model for the cross-linking of ultra-high viscous alginate
          M. Roland*, M. Gepp, I. Meiser, F. Stracke, H. Zimmermann, S. Diebels
        • 738 - Finite deformation modeling of strain localization in saturated soils under non-isothermal conditions
          K. Oliynyk, J. Carbonell, M. Ciantia, C. Tamagnini*
        • 847 - High and low order hybridisable discontinuous Galerkin methods for flow problems
          A. Huerta*, M. Giacomini, R. Sevilla
        • 310 - A Non-Intrusive Reduced Order Modelling Approach Applied to the Calibration Process in Plastics Profile Extrusion
          D. Hilger*, S. Elgeti
        • 799 - Model order reduction approach for problems with moving discontinuous features
          H. Bansal*, L. Iapichino, S. Rave, W. Schilders, N. van de Wouw
        • 800 - Reduced basis methods for initial condition estimation: Application to transport of contaminants
          F. Silva*, N. Aretz, M. Grepl, K. Veroy
        • 971 - A hybrid POD approach for transient flow problems.
          V. Tsiolakis*, T. Kvamsdal, A. Rasheed, E. Fonn, H. van Brummelen
        • 814 - A priori and a posteriori PGD separated solutions of parametrised incompressible flow problems
          M. Giacomini*, R. Sevilla, A. Huerta
          • 1254 - Model Selection and Coupling in the Context of Biomedical Device Design
            M. Behr*
          • 1255 - Developments in additive manufacturing processes: industrial technologies and numerical analyses
            M. Chiumenti*
            • 833 - Parallel FSI simulations with elastic contact on non-conforming overlapping meshes
              R. Krause*, M. Nestola, C. von Planta, A. Kopanicakova, P. Zulian
            • 403 - A Hybrid Interface Preconditioner based on Overlapping Domain Decomposition for Monolithic Fluid-Solid Interaction Problems
              M. Gee*, M. Mayr
            • 690 - FROSch Preconditioners for Land Ice Simulations of Greenland and Antarctica
              A. Heinlein*, M. Perego, S. Rajamanickam
            • 342 - Partitioned Coupling vs. Monolithic Block-Preconditioning Approaches for Solving Stokes-Darcy Systems
              J. Schmalfuß*, C. Riethmüller, M. Altenbernd, K. Weishaupt, D. Göddeke
            • 782 - Adaptive Field-split Nonlinear Preconditioning for PDEs with Error Bounds on Output Functionals
              L. Liu, D. Keyes*
            • 793 - A structural optimization pipeline with multiple data-driven reduced order methods
              M. Tezzele*, G. Rozza
            • 334 - Efficient solution of coupled problems through DEIM-based data projection across non-conforming interfaces
              E. Zappon*, A. Manzoni, A. Quarteroni
            • 409 - A reduced-basis approach for coupled flow in free-fluid and porous media
              R. Kandinskii*, W. Desmet, F. Naets, Y. Swolfs, S. Lomov
            • 362 - Registration-based model reduction with application to parameterized time-dependent shallow water equations
              L. Zhang*, T. Taddei
            • 927 - A Reduced Order Model for incompressible flows at intermediate Reynolds numbers
              M. Girfoglio*, A. Quaini, G. Rozza
            • 786 - A Non-Intrusive Reduced Basis Method for Accelerating Two-Scale Simulations (Online)
              T. Guo*, K. Veroy
            • 368 - KEYNOTE - Parallelized Multilevel and Multiindex Markov Chain Monte Carlo for Large-Scale Uncertainty Quantification
              L. Seelinger*, A. Reinarz, R. Scheichl
            • 428 - Neural network based one-shot inversion and optimization
              C. Schillings*, P. Guth, S. Weissmann
            • 367 - Multilevel best linear unbiased estimators for Uncertainty Quantification
              D. Schaden, E. Ullmann*
            • 383 - Data assimilation and active learning for multi-physics problems affected by uncertainty
              L. Mainini*
            • 372 - Uncertainty Quantification of an Autonomous Surface Vehicle by Multi-fidelity Surrogate Models
              S. Ficini*, U. Iemma, R. Pellegrini, A. Serani, A. Odetti, M. Caccia, M. Diez
            • 395 - Infrared thermography of the DED-LB/M and PBF-LB/M processes
              N. Scheuschner*, S. Altenburg, G. Mohr, A. Straße, A. Gumenyuk, K. Hilgenberg, C. Maierhofer
            • 336 - A thermo-mechanically coupled Discrete Element Method for the simulation of bed-based Additive Manufacturing processes
              B. Dorusen*, M. Geers, J. Remmers
            • 748 - Detailed numerical analysis of thermomechanical simulations of the SLS process.
              C. Burkhardt*, J. Mergheim
            • 379 - Numerical analysis of laser redefining bead geometry in wire-based plasma arc-laser hybrid additive manufacturing of titanium alloys
              X. Chen*, C. Wang, J. Ding, S. Williams
            • 382 - Thermo-Hydro-Mechanical Isogeometric Finite Element Analysis of Artificial Ground Freezing
              R. WILLIAMS M.*, H. Bui, G. Meschke
            • 356 - Multiphysics modelling of tracer transport in surface-subsurface water systems
              K. Živkovic*, H. Gotovac, M. Zelenika
            • 952 - Fluid flow and strain localisation in partially saturated porous media
              M. Zaim*, G. SCIARRA, P. Kotronis, F. Collin
            • 470 - Numerical results and theoretical discussion of suspension mechanical behaviour under simple shear conditions
              K. Boschi*, P. Marveggio, I. Redaelli, C. di Prisco
            • 709 - Improved coupling formulations and time integration strategies for ocean-atmosphere interactions
              E. Blayo*, F. Lemarié, C. Pelletier, S. Thery, S. Clément
            • 699 - A Schwarz iterative method to evaluate ocean-atmosphere coupling schemes
              O. Marti*, F. Lemarié, E. Blayo, S. Valcke
            • 682 - Iteratively partitioned, second-order, multirate time stepping for fluid-fluid interaction with flux conservation
              J. Connors*, R. Dolan
            • 787 - Coupling of Naveri-Stokes equations and their hydrostatic versions
              H. Tang, W. Dong*
            • 1244 - Mass-Conserving Implicit-Explicit Methods for Coupled Compressible Navier-Stokes Equations
              S. Kang*, E. Constantinescu, H. Zhang, R. Jacob
              • 1257 - Partitioned Analysis: Advances during 2001-Present and Future Challenges
                K. Park*
              • 974 - Quadcopter with thrust vector control based on Scotch yoke
                S. Semendyaev*
              • 977 - Mechanical Constraint Arrangement and Its Multibond Graph Representation
                I. Kosenko*
              • 976 - KEYNOTE - Influence of the Combined Dry Friction on the Dynamics of the Rigid Ball Moving Along Two parallel Rails
                A. A. Kireenkov*
              • 975 - Modeling an unsteady elastic diffusion processes in a Timoshenko plate.
                A. Zemskov*, D. Tarlakovskii
              • 980 - The inverse transient problem of identifying the law of change in the cross-sectional area of an elastic bar
                G. Fedotenkov *, Y. Vahterova
              • 984 - Determination of the optimal positions of the supports of a homogeneous plate under non-stationary action
                N. Lokteva*, S. Borshevetskiy
              • 1012 - A conservative implicit-PIC scheme for the hybrid kinetic-ion fluid-electron plasma model on curvilinear meshes
                A. Stanier*, L. Chacon, G. Chen
              • 621 - An adaptive scalable fully implicit algorithm based on stabilized finite element for reduced visco-resistive MHD
                Q. Tang*, L. Chacon, T. Kolev, J. Shadid, X. Tang
              • 400 - Block Preconditioning of a Semi-Implicit Gyrokinetic Model of Fusion Plasmas
                L. Ricketson, D. Ghosh*, M. Dorr, M. Dorf
              • 291 - An Algebraic Monolithic Method for Volume-coupled Multiphysics Problems.
                P. Ohm*, E. Cyr, J. J. Hu, J. N. Shadid, R. S. Tuminaro, T. Wiesner
              • 87 - Multilevel block preconditioning for mortar contact formulations
                M. Mayr*, A. Popp
              • 732 - KEYNOTE - Hybrid reduced order models for coupled heat transfer problems
                G. Stabile*, G. Rozza
              • 714 - Thermal coupling simulations with a viscoelastic fluid flow
                L. Moreno*, R. Codina, J. Baiges
              • 313 - On Modeling Interfaces in Coupled Thermoelasticity: Asymptotic Approach and Numerical Validation
                M. Serpilli*, S. Dumont, R. Rizzoni, F. Lebon
              • 422 - A Local POD - HROM framework for fast and accurate numerical simulations (Online)
              • 785 - Distributed model order reduction of a nonlinear cell model using HAPOD
                T. Leibner*, M. Matis, M. Ohlberger, S. Rave
              • 810 - KEYNOTE - Combining Coupled Skorokhod SDE and Lattice Gas Frameworks for Multi-fidelity Modelling of Complex Behavioral Systems (Online)
                T. Thieu*, R. Melnik
              • 729 - Utilizing multi-fidelity UQ methods to enable the efficient solution of stochastic multi-scale hybridized differential equations
                T. Wildey*
              • 390 - Greedy resource allocation for analysis of integrated system models
                S. Friedman, J. Jakeman*, M. Eldred, L. Tamellini, A. Gorodetsky, D. Allaire
              • 404 - Computational Budget Allocation in Multi-fidelity Problems with Bandit Learning
                A. Narayan*, Y. Xu, V. Keshavarzzadeh
              • 407 - Uncertainty Quantification via Multi-Fidelity Model Reduction
                A. Doostan*
              • 359 - Hierarchically decomposed finite element method for the coupled four fields of the fluid-structure–piezoelectric–circuit interaction
                P. RAMEGOWDA*, D. ISHIHARA
              • 796 - Forced vibration of the aluminum beam using a piezoelectric actuator - experiment and finite element analysis.
                V. Goga*, V. Kutiš, Š. Berta, G. Gálik, J. Murín, J. Paulech
              • 733 - Piezoelectric beam finite element and its reduction to state space model
                V. Kutis*, J. Paulech, G. Galik, J. Murin, V. Goga
              • 944 - Numerical study of mechanical degradation in carbon-coated graphite active particles of Li-ion battery anodes
                J. Marin-Montin*, F. Montero-Chacón
              • 1023 - KEYNOTE - Coupled Problems in Control Co-Design of Large Wind Farms
                F. Sotiropoulos*, C. Santoni
              • 331 - Numerical simulation of fluid-structure interaction cases on unstructured grid with dynamic mesh adaptation
                T. Fabbri*, G. Balarac, P. Benard, V. Moureau
              • 393 - Modeling of the perivascular flow during sleep using a fluid poroelastic structure interaction approach
                A. Vallet*, K. Kuchta, L. Bojarskaite, D. Bjørnstad, R. Enger, K. Mardal
              • 1001 - Sensitivity of the least stable modes for passive control of the flow around an elastically-mounted circular cylinder
                D. Dolci*, B. Carmo
              • 306 - Multi-physics Simulations of a Wind Turbine in Icing Conditions
                F. Caccia*, V. Motta, A. Guardone
              • 797 - The Interface-Flux-Recovery (IFR) Method for Conservative and Stable Coupling Schemes in Geophysical Fluids and Mechanics
                C. Sockwell*, K. Peterson, P. Kuberry, P. Bochev
              • 638 - Advances in modeling the termo-mechanical state of ice sheets
                M. Perego*
              • 781 - Benchmarking the quality of the regridding functionality for different coupling software used in Earth System Modelling
                S. Valcke*, A. Piacentini, G. Jonville
              • 824 - Earth System Remap using Generalized Moving Least Squares (GMLS) in Conjunction with Clip and Assured Sum (CAAS)
                P. Kuberry*, K. Peterson, P. Bochev
              • 830 - Hybrid and fully online remappers for coupled Climate workflows
                V. Mahadevan*, I. Grindeanu, J. Sarich, R. Jacob

              Wednesday, 16-06-2021

              • 85 - Composite materials for electromagnetic shielding applications: multiscale modeling via semi-analytical homogenization techniques
                G. Al Achkar*, L. Pichon, L. Daniel
              • 99 - A POD Accelerated Approach for the Simulation of 3D Magneto-Mechanical Problems with Application to MRI Scanners
                P. Ledger*, M. Seoane, A. Gil, M. Mallett, S. Zlotnik
              • 174 - Solution of Electromagnetic Problem for an Application in Advanced Pultrusion Processes
                P. Akishin*, E. Barkanov, M. Graf, R. Emmerich
              • 312 - A FEM-BEM coupling for the modeling of linear magnetoelectric effects in composite structures
                A. Urdaneta Calzadilla*, O. Chadebec, N. Galopin, I. Niyonzima
              • 326 - Computational analysis of tibial bone remodelling under electrical stimulation considering the piezoelectric properties
                Y. Bansod*, M. Kebbach, D. Kluess, R. Bader, U. van Rienen
              • 340 - Finite Element modeling of beam coupling impedances in particle accelerators
                E. Gjonaj*
              • 579 - KEYNOTE - Simulating Moving Boundary Problems with the (Weighted) Shifted Boundary Method
                G. Scovazzi*, O. Colomés, L. Nouveau, K. Li, L. Nouveau, D. Xu
              • 286 - Eulerian Formulation Using Lagrangian Marker Particles with Reference Map Technique for Fluid-structure Interaction Problem
                T. Shimada*, K. Nishiguchi, C. Peco, S. Okazawa, M. Tsubokura
              • 333 - A Transonic Potential Solver with an Embedded Wake Approach using Multivalued Finite Elements
                I. López*, E. Baez Jones, M. Núñez, R. Zorrilla, R. Rossi, K. Bletzinger, R. Wüchner
              • 717 - Adjoint based airfoil shape optimization using the full-potential equation on unfitted meshes
                M. Nuñez*, I. Lopez, J. Baiges, R. Rossi
              • 784 - Preliminary results of a high-order shifted boundary method with Finite Volume and Discontinuous Galerkin schemes for hyperbolic systems
                M. Ciallella*, E. Gaburro, M. Lorini, M. Ricchiuto
              • 794 - Accelerating the FlowSimulator: Profiling and scalability analysis of an industrial-grade CFD-CSM toolchain
                I. Huismann*, L. Reimer, S. Strobl, J. Eichstädt, R. Tschüter, A. Rempke, G. Einarsson
              • 970 - Progress in Kinetic Consistent Approach for Uncompressible, Conductive Liquid MHD Models
                B. Chetveryshkin, A. Saveliev, V. Saveliev*
              • 979 - Kinetic Approach of MGD Models on High Performance Computing Systems
                B. Chetverushkin*
              • 344 - Bayesian inversion for the coupled detection of spatial properties and geometry in a seepage flow field
                M. KOCH*, M. OSUGI, K. FUJISAWA, A. MURAKAMI
              • 172 - Simulating water and soil gushing around shield tunnel with Material Point Method
                X. XIAOCHUANG*, F. CECCATO, D. ZHANG, M. ZHOU
              • 361 - A Numerical Model Based on Combined Peridynamics and Discrete Element Method for Fracture Behavior of Geomaterials
                Y. Fukumoto*, T. Shimbo
              • 811 - Thermoelastic Analysis of Enhanced Geothermal Systems Using a Fully Coupled Thermo-Hydro-Mechanical Model
                M. Aliyu*, C. Hills
              • 296 - Coupling CAD and BEM for simulations in geomechanics
                G. Beer, C. Duenser, V. Mallardo*
              • 419 - Space-Time Finite Element Methods for Fully Dynamic Pororelasticity and Related Problems
                M. Bause*, U. Köcher, M. Anselmann
              • 373 - Robust preconditioners for perturbed saddle-point problems: Application to the four-field Biot equations
                W. Boon*, M. Kuchta, K. Mardal, R. Ruiz-Baier
              • 353 - Block-partitioned solvers for a fully dynamic poromechanics model.
                J. Both*, N. Barnafi, F. Radu, P. Zunino, A. Quarteroni
              • 406 - Re-polarisation of macrophages within a multi-scale moving boundary tumour invasion model
                D. Trucu*, S. Suveges, R. Eftimie
              • 389 - The Coupling Concepts Behind PreCICE
                B. Uekermann*
              • 355 - Realizing CoSimulation in and with a multiphysics framework (Online)
                P. Bucher*, A. Ghantasala, P. Dadvand, R. Wüchner, K. Bletzinger
              • 385 - FEMuS-Platform: a numerical platform for multiscale and multiphysics code coupling
                A. Chierici*, G. Barbi, G. Bornia, D. Cerroni, L. Chirco, D. Roberto, V. Giovacchini, S. Manservisi
              • 281 - Surrogate-aided quasi-Newton techniques for fluid-structure interaction
                N. Delaissé*, D. Fauconnier, J. Degroote
              • 341 - Performance Impact of the Newton Iterations per Solver Call in Partitioned Fluid-Structure Interaction
                T. Spenke*, N. Hosters, M. Behr
              • 397 - A Non-Intrusive Model Reduction Method in Roller forming
                D. Baroli*, J. Sandoval, C. idzik, K. Veroy, F. Piscaglia, J. lohmar, A. Posada, A. Kraemer, G. Hirt
              • 735 - Uncertainty Quantification for Electroporation-Based Treatment
                P. Lakshmi Narasimhan*, Z. Tokoutsi, D. Baroli, M. Baragona, K. Veroy, R. Maessen
              • 826 - Reinforcement learning based design and optimization of pass schedules for hot rolling
                C. Idzik*, A. Krämer, G. Hirt
              • 967 - Towards richer digital shadows with characterized explanations
                A. Posada-Moreno*, H. Zhou
                • 1256 - Physics-based and data-driven hybrid modeling: when data enrich models and models render data smarter (Online)
                  F. Chinesta*
                • 1258 - Advanced isogeometric simulations of coupled problems
                  A. Reali*
                  • 352 - Coupled formulations for the modeling of magnetostrictive materials
                    M. Harutyunyan*, S. Schöps
                  • 637 - Attenuation of magnetohydrodynamic oscillations in an aluminum reduction cell using periodic structures
                    T. Andere*, R. Oliveira
                  • 959 - Liquid Metal Flows with MHD Interaction in Rotating Co-axial Cylinder
                    R. Sasaki*, T. Fujino, H. Takana, H. Kobayashi
                  • 972 - On the Status of Applications of a Novel Method for Magnetohydrodynamic Simulations on High Performance Computational Systems in Astrophysics and Cosmology
                    B. Chetverushkin*, A. Saveliev, V. Saveliev
                  • 104 - A Novel Electric Formulation for Solving Time-harmonic Eddy Current Problems with Multiply-Connected Domains
                    F. Moro*, L. Codecasa
                  • 319 - Analysis and approximation of a linearized poromechanics problem: compressible and incompressible cases
                    M. Barré*, C. Grandmont, P. Moireau
                  • 746 - Efficient solution of isogeometric analysis for poroelasticity
                    Á. Pé*, C. Rodrigo, F. Gaspar
                  • 728 - An enhanced fixed-stress preconditioner for coupled poroelasticity
                    H. T. Honório*, M. Ferronato, M. Frigo, F. W. Giacomelli, C. R. Maliska
                  • 672 - Partitioned methods for fluid-porohyperelastic structure interaction based on Robin-Robin transmission conditions
                    A. Seboldt, O. Oyekole, J. Tambaca, M. Bukac*
                  • 305 - A level-set based mesh adaptation technique for mass conservative ice accretion in unsteady simulations
                    A. Donizetti*, B. Re, A. Guardone
                  • 317 - Coupling geometry and simulation for aerodynamic shape optimisation: an isogeometric approach
                    S. Pezzano*, R. Duvigneau, M. Binois
                  • 303 - Efficient parallel algorithms for coupled fluid-particle simulation
                    G. Baldan*, T. Bellosta, A. Guardone
                  • 357 - Goal-based adaptive mesh control of coupled stochastic-deterministic errors for viscous flows
                    A. Belme*, F. Alauzet, A. Dervieux
                  • 405 - Model Reduction for Kinetic Equations
                    S. Glas*
                  • 827 - Model Order Reduction for Fluid Structure Interaction problems: state of the art and advances
                    G. Rozza*, M. Nonino
                  • 363 - Structure-Preserving Model Order Reduction for a port-Hamiltonian-based Fluid-Structure Interaction Model of a Classical Guitar
                    J. Rettberg*, D. Wittwar
                  • 391 - Structure-preserving reduced basis methods for parametric Hamiltonian dynamical systems
                    C. Pagliantini*
                  • 221 - Model order reduction of realistic cardiovascular flow by the Reduced Basis Element Method.
                    S. Deparis, L. Pegolotti*
                  • 337 - Neural-Network-based Nonlinear Model Order Reduction for Parameterized PDEs: Methods, Advances and Problems
                    L. Ernst*
                  • 349 - Performance of large diameter storage structures in deep exothermic waste repository
                    M. Alonso*, J. Vaunat, M. Vu, A. Gens, M. Mánica
                  • 671 - Explicit asynchronous absorbing layers for seismic wave propagation in 3D unbounded domains
                    S. LI*, M. Brun, I. Djeran-Maigre
                  • 921 - A coupled elasto-plasto-damaged formulation for ordinary concrete at the meso-scale with explicit modelling of entrapped air macropores.
                    G. Mazzucco, B. Pomaro*, V. A. Salomoni, C. E. Majorana
                  • 321 - An introduction to the preCICE coupling library
                    I. Desai*, B. Uekermann
                  • 314 - Resin Transfer Molding (RTM) of fiber-reinforced polymer sandwich parts: mold filling simulations with fluid structure interaction
                    J. Seuffert*, L. Kaerger, F. Henning
                  • 370 - Coupled multibody-mid fidelity aerodynamic solver for tiltrotor aeroelastic simulation
                    A. Cocco*, A. Savino, A. Zanotti, A. Zanoni, P. Masarati, V. Muscarello
                  • 325 - Coupling multi-body and fluid dynamics analysis with preCICE and MBDyn
                    C. Caccia*, P. Masarati
                    • 159 - Generation of High-Order Tetrahedral Meshes from Patient-Specific Geometries for use in Cardiac Biomechanics Simulation
                      F. Mohammadi, B. Wentz, S. Shontz*, C. Linte
                    • 680 - The generation of unit P2 meshes \\ Error estimation and mesh adaptation (Online)
                      R. Zhang*, A. Johnen, J. Remacle, A. Bawin
                    • 828 - Coupling of numerical models of mesh generation and heat transfer of a tree trunk in a forest fire environment
                      E. Conceição*, J. Gomes, M. Lúcio, J. Raposo, D. Viegas, M. Viegas
                    • 1259 - Multiscale simulation of void growth using automatic anisotropic adaptive meshing and a level finite element approach
                      L. Le Gohebel*, L. Silva, S. Le Corre, H. Digonnet, T. Nguyen, S. Colliou
                    • 386 - Simulation of TALL-3D experimental facility with a multiscale and multiphysics computational platform
                      G. Barbi*, A. Cervone, A. Chierici, L. Chirco, R. Da Via`, F. Franceschini, V. Giovacchini, S. Manservisi
                    • 330 - Coupling strategies for three phase simulation of sloshing of ponding water on a flexible membrane with wind excitation (Online)
                      N. Kodunthirappully Narayanan*, R. Wüchner, J. Degroote
                    • 360 - Investigation of the efficiency of semi-implicit solver for fuel-droplet-laden compressible flow
                      Y. Cho*, R. Bale, M. Tsubokura, N. Oshima
                    • 376 - Thermal hydrayulics and neutronic codes coupling for the analysis of a Lead Fast Reactor
                      V. Giovacchini*, G. Barbi, A. Chierici, M. Lanconelli, S. Manservisi
                    • 388 - AWJC Nozzle simulation by 6-way coupling of DEM+CFD+FEM using preCICE coupling library
                      P. Adhav*, X. BESSERON, A. ROUSSET, B. PATERS
                    • 652 - Aeroelastic simulation of slender wings for electric aircraft: a partitioned approach with DUNE and preCICE
                      M. Firmbach*, R. Callies
                    • 307 - Numerical Simulation of Fluid-Structure Interaction for Thin Flat Delta Wing at Transonic Speed based on Opensource Software
                      Y. Takahashi*
                    • 762 - Enabling a Multi-Scale Electro-Mechanical Skeletal Muscle Model for High-Performance Computing Using Volume Coupling.
                      B. Maier*, D. Schneider
                    • 763 - Adaptive Trust-Region Reduced Basis Approximation for PDE-Constrained Parameter Optimization
                      S. Banholzer, T. Keil, L. Mechelli, M. Ohlberger, F. Schindler, S. Volkwein*
                    • 401 - Randomized Local Model Order Reduction for Nonlinear PDEs
                      K. Smetana*, T. Taddei
                    • 259 - Registration-based model reduction of parameterized PDEs with sharp gradients
                      T. Taddei*, L. Zhang
                    • 263 - Space-time variational methods for parabolic optimal control control problems
                      N. Beranek*
                    • 322 - Space-time variational methods for parabolic optimal control problems - Numerical aspects and implementation
                      A. Reinhold*
                    • 237 - Adaptive model reduction for coupled nonlinear parametric dynamical systems
                      S. Chellappa*, L. Feng, P. Benner
                    • 707 - On the Stability of a Steady Convective Flow in a Vertical Layer of a Chemically Reacting Fluid
                      A. Gritsans, V. Koliskina, A. Kolyshkin*, F. Sadyrbaev
                    • 378 - Comparison between experimental results and numerical simulations for a high frequency friction rig. Effect of fretting-wear on dynamic analysis. (Online)
                      F. Tubita*, A. Fantetti, F. Thouverez, L. Blanc
                    • 777 - Nuclear Reactor Pressure Thermal Shock Simulation
                      G. Gálik*, V. Kutiš, J. Paulech, V. Goga
                    • 415 - Modelling of water penetration and hygro-expansion in a paper sheet
                      N. Dave*, R. Peerlings, T. Massart, M. Geers
                    • 844 - Nonlocal-nonlocal and local-nonlocal interface models
                      G. Capodaglio, M. D'Elia, C. Glusa, M. Gunzburger*
                    • 817 - Analysis of Coupling Approaches for Classical Linear Elasticity and Non-local Models
                      S. Prudhomme*, P. Diehl
                    • 727 - Overall Equilibrium in the Coupling of Peridynamics and Classical Continuum Mechanics
                      G. Ongaro, P. Seleson*, U. Galvanetto, T. Ni, M. Zaccariotto
                    • 647 - A Fractional Model for Anomalous Diffusion with Increased Variability
                      M. D'Elia, C. Glusa*
                    • 753 - Phase-field models with nonlocal interactions in the context of solidification
                      O. Burkovska*
                    • 218 - Nonlocal Models with subdomain-dependent Kernels
                      C. Vollmann*, V. Schulz
                    • 990 - KEYNOTE - High-Fidelity Flexible Multibody Aeroelasticity Framework for Bio-inspired Drones and Unmanned Air Vehicles
                      R. Jaiman*
                    • 377 - Computational Fluid-Structure Interaction Framework for Simulating Characteristic Deformations in Insect Flapping Wings
                      M. Onishi*, D. Ishihara
                    • 320 - Multi-physics simulation of deicing pneumatic system
                      A. Rausa*, A. Shvarts, A. Guardone, L. kaczmarczyk, C. pearce
                    • 316 - Numerical Study on the Fluid-Structure Interaction and Aerodynamic Noise Radiation of a Membrane Airfoil.
                      E. Kolb*, M. Schäfer
                    • 1000 - High-fidelity aeroelastic simulation of flexible wings in separated flows
                      M. Lahooti*, R. Palacios, S. Sherwin